How to set a custom LAN IP range

If you have an advanced network configuration, you may consider setting up a custom LAN IP range. These simple steps will save you from having to reset or reconfigure each device every time to work with your Vilo mesh network, particularly if a device has a static IP address or only works with a range.

Here is how to set a custom LAN IP range:

  1. Open the Vilo app.
  2. Tap into the Vilo network, tap the 3 dots on the right upper corner.
  3. Tap “Advanced Settings” --> “Lan Settings” --> "Lan Settings” Select "Manual IP", you will see the current LAN IP information. You can set your custom IP range on this page. Please note - we only support the following IP ranges:  




Here are examples for setting your custom LAN IP range: 




Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.